Modulating Control Valve Actuators

Product Details:

Basis Weight Control Valves Especially for the paper industry The basis weight valve is one of the most important valves in a paper machine. A valve with proper valve characteristic, and an actuator with a high resolution, is required to produce paper with the right grammage (mass per unit area) within a narrow tolerance range.Basis weight valves in paper machines The paper grammage is continuously measured during operation of the paper machine. This is done with aball segment valve equipped with an electrical actuator. The actuator has a high resolution and in our case, we can provide a valve that gives a resolution of 1:8000. The stock flowing through the valve and its consistency is accurately controlled and with dilution in the short circulation and control of the wire speed, the desired basis weight of the paper is obtained.

Features:

• V-Notch ball valve offers equal % characteristics for precise control.
• Combination of Electro-Mechanical Actuator & V-Notch Ball Valve.
• Flangeless or flanged (Optional) body.
• Actuator with almost negligible backless .
• Digital valve Position Indicator.
• Easy to install and user friendly.
• Suitable to 5 TPD to 300 TPD.
• Customize design to satisfy individual needs.
• Can be hooked to DCS/QCS system.
• Maintenance free.

Technical Specifications:

• V-port segment valve Construction: Flangeless or Flanged V-Port segment valve.
• Nominal Dimensions: DN 50-500 / 2” to 20”/ PN25/40 (ANSI 150/300)
• Flow: 100% Full Open & Close
• Bodies: SS-316
• Temperature Range: -40..+2600C
• Operation Range: 90 Degree
• With Full Steps: 10,000 / 900
• With Full Steps: 20,000 / 900
• Step Motor Rotary Actuator Valve Size: DN 50–500 / 2”to 20”
• Output Torque: 200Nm
• Gear Ratio: 1:141
• Speed of Operation: 7 to 3000 Sec. Adjustable (900 Rotation)
• Feedback Potentiometer: 2K Ohms
• Number of Steps / Round: 20,000
• Working Pressure Range: upto 40 bar
• Motor Type: Non Blocking Stall Duty
• Holding Torque: 5,4Nm
• Input Signal: 4020mA / 5-24 V Pulses (Optional)
• Class of Insulation: B
• Control Unit Supply Voltage: 230V AC, Option 115VAC/50 Hz
• Nominal Power: 200 W Max. Motor Power
• Output Power: Max 9A, 70V DC to Motor in 6,3A
• Protection Class: IP-65
• Max. Ambient Temperature: 500C
• Control Signals: 25W
• Pulse Duration: Min. Input Freq. 0Hz / Max. Input Freq. 400Hz (1/4, ½, 1/1-step) 200 Hz (2/1-step)
• Time Duration: Default Speed 150Hz/ Min. Speed 50Hz/Max. Speed 2kHz
• Electronics Locations: Max. Distance between Motor and Electronics is 120m. / 360ft.
• Manual Push Button: Manual Auto Push Buttons /Open & Close Push Buttons / LCD Display
• Cable: With 120 Mtrs.
• Voltage Control: Through UPS

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: ahmednad
• Production Capacity: 50 nos/ Month
• Delivery Time: 1 week
• Packaging Details: Standard Wooden Packing

Product Details:

"Cair" offers Modulating Type 220V AC Single Phase Electrical Actuator Operated 2 Way Globe Type Control Valve Flanged End.

Electrical Actuator Details:

• Manufacturer: Cair Euromatic Automation
• Brand: Cair
• Model: VOND PRO
• Characteristic: Modulating Type
• Travel: Linear
• Indicator: Continuous Position Indicator
• Phase: Single Phase
• Input Signal: 4 ~ 20 mA
• Output Signal: 4 ~ 20 mA
• Motor Insulation: Class F
• Protection Class: IP 65 Weather Proof
• Position on Power Fail: Stay Put
• Manual Override: Wheel Type
• Size Range: 15 MM To 200 MM

Accessories:

• Interface Unit
• Control Panel
• Input Signal: 4 ~ 20 mA
• Position Feedback: 4 ~ 20 mA

Globe Type Control Valve Details:

• Characteristic: Proportionate Type (Equal % Type)
• Valve Type: 2 Way Globe Type Flow Pattern
• Body: ASTM A216 Gr. WCB
• Trims: SS 410
• Trim Design: Cage Guided Pressure Balanced
• Ends: Flanged End to ANSI 16.5 RF (150#)
• Bonnet: Standard
• Gland Packing: Teflon / Graphoil
• Temperature: 250°C
• Leakage Class: IV
• Working Pressure: 8 Kg/Cm²

Additional Information:

• Item Code: VONDPRO
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Ahmedabad
• Production Capacity: 1
• Delivery Time: Ready Stock-Depend upon quantity
• Packaging Details: Standard

Product Details:

"Cair" offers Modulating Type 220V AC Single Phase Electrical Actuator Operated 2 Way Globe Type Control Valve Flanged End.

Electrical Actuator Details:

• Manufacturer: Cair Euromatic Automation
• Brand: Cair
• Model: VOND PRO
• Characteristic: Modulating Type
• Travel: Linear
• Indicator: Continuous Position Indicator
• Phase: Single Phase
• Input Signal: 4 ~ 20 mA
• Output Signal: 4 ~ 20 mA
• Motor Insulation: Class F
• Protection Class: IP 65 Weather Proof
• Position on Power Fail: Stay Put
• Manual Override: Wheel Type
• Size Range: 15 MM To 200 MM

Accessories:

• Interface Unit
• Control Panel
• Input Signal: 4 ~ 20 mA
• Position Feedback: 4 ~ 20 mA

Globe Type Control Valve Details:

• Characteristic: Proportionate Type (Equal % Type)
• Valve Type: 2 Way Globe Type Flow Pattern
• Body: ASTM A216 Gr. WCB
• Trims: SS 410
• Trim Design: Cage Guided Pressure Balanced
• Ends: Flanged End to ANSI 16.5 RF (150#)
• Bonnet: Standard
• Gland Packing: Teflon / Graphoil
• Temperature: 250°C
• Leakage Class: IV
• Working Pressure: 8 Kg/Cm²

Additional Information:

• Port of Dispatch: Ahmedabad
• Production Capacity: 1
• Delivery Time: Ready Stock-Depend upon quantity
• Packaging Details: Standard

Product Details:

Pressure Maintaining Valve Cair offers Modulating Type 220V AC Single Phase Electrical Actuator Operated 2 Way Globe Type Therma Oil Control Valve for Hot Air Generator.

Features:

• Globe Pattern single seated Control Valve.
• Precise Regulating with High flow capacity
• Large type of trim Top operating design for various duty conditions
• In line Repairable Design for easy maintenance
• Tight closure even in extreme operating conditions
• Multi action type Actuators to meet different application
• High flow capacity & range ability
• Top operating for easy trim inspection without disturbing the lined.
• Designed and tested to deliver 100% performance under specified operating conditions
• Wide selection of actuators to meet most requirements
• Metal to Metal Seating
• Manual Over Ride available
• MOC: WCB, CF8, CF8M, CF3M etc.

Electrical Actuators Details:

• Manufacturer: Cair Euromatic Automation Pvt. Ltd.
• Brand: Cair
• Model: VOND
• Characteristic: Modulating Type
• Travel: Linear
• Indicator:Continuous Position Indicator
• Phase: Single Phase
• Input Signal: 4 ~ 20 mA
• Output Signal: 4 ~ 20 mA
• Motor Insulation: Class F
• Protection Class: IP 65 Weather Proof
• Position on Power Fail: Stay Put
• Manual Override: Wheel Type

Accessories:

• Interface Unit Control Panel
• Input Signal: 4 ~ 20 mA
• Position Feedback: 4 ~ 20 mA
• Size Range: 15 MM To 200 MM

Globe Type Control Valve Details:

• Characteristic: Proportionate Type (Equal % Type)
• Valve Type: 2 Way Globe Type Flow Pattern
• Body: ASTM A216 Gr. WCB IBR & NON IBR
• Trims: SS 410
• Trim Design: Cage Guided Pressure Balanced
• Ends: Flange End to ANSI 16.5 RF (150#)
• Bonnet: Standard Gland
• Packing: Teflon / Graph oil
• Temperature: 250° C
• Leakage Class: IV
• Working Pressure: 8 Kg/Cm²

Additional Information:

• Port of Dispatch: Ahmedabad
• Production Capacity: 50 nos per month
• Delivery Time: 2 week
• Packaging Details: standard wooden packing

Product Details:

Furnace Oil Control Valve
Cair Manufactures On - Off Type 220V AC Single Phase Linear Electrical Actuator Operated 2way - 3 Way Globe Type Control Valve for Thermic Fluid Application

Electrical Actuator Details

• Manufacturer: Cair Euromatic Automation Pvt. Ltd.
• Brand: Cair
• Model: VO Basic
• Characteristic: On - Off Type
• Travel: Linear
• Indicator: Continuous Position Indicator
• Phase: Single Phase
• Motor Insulation: Class F
• Protection Class: IP 65 Weather Proof
• Limit Switch: 1NO 1NC Type
• Position On Power Supply: Stay Put
• Manual Override: Wheel Type`

 

2 Way - 3 Way Globe Control Valve:

• Body: ASTM A216 Gr. WCB
• Trims: 13 Cr.
• Ends: Flanged End 150#
• Bonnet: Standard
• Packing: Graphoil
• Temperature: 450°C
• Leakage Class: Class IV
• Working Pressure: Up to 10Kg/Cm
• Characteristic: Linear On – Off
• Application: Motor Operated Valve MOV

Additional Information:

• Item Code: VOND-CKD
• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Port of Dispatch: Ahmedabad
• Production Capacity: 50 Piece/ Month
• Delivery Time: 1 week
• Packaging Details: wooden box

Product Details:

Fail Safe Control Valve
Failsafe Closed Position Is Helpful For Esd, Situation.. It Is A Good Feature To Enhance Control In Process Valve Automation.
“Cair” Modulating Type 24V Dc Rotary Electrical Actuator Operated Ibr Globe Type Control Valve With Battery Back Up.

Electrical Actuator Details:

• Manufacturer: Cair Euromatic Automation Pvt.Ltd.
• Brand / Model: Cair / Mod –Pro B.B.U
• Approvals: Design (Tuv) / Iso 9001:2008 / Ce / Iec
• Characteristic: Modulating Type
• Input Signal: 4~20Ma
• Feedback Signal: 4~20Ma
• Travel: 90Deg ±5Deg
• Indicator: Continuous Position Indicator
• Supply: 24 V Dc
• Body Material: Aluminum Alloy
• Ambient Temperature: -10Degc ~ 55Degc
• Motor Insulation: Class F
• Auxiliarry Switch: 1 No 1 Nc Out Put Of 24V Dc
• Protection Class: Ip 67 – Weather Proof
• Manual Override: Provided
• Power Failure Position: Close (Through Battery Backup)

Ibr Globe Type Control Valve

• Body: Wcb
• Seat: Ss 316
• Plug: Ss 316
• Stem: Ss 316
• Gland: Ptfe Sleeve
• Temperature: Up To 200Degc
• Working Pressure: Up To 12 Kg/Cm²
• Pressure At Inlet: 8 Kg/Cm²
• Shut Of Pressure: 10.54 Kg/Cm²
• Pressure Drop In Valve: 0.5Kg/Cm²

Additional Information:

• Item Code: VOND-BB
• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Port of Dispatch: AHMEDABAD
• Production Capacity: 20PIECE / MONTH
• Delivery Time: 3 WEEKS
• Packaging Details: STANDARD WOODEN PACKING

Product Details:

Gsm Control Valve System For Paper & Pulp Industries
Basis Weight Control Valves - Especially For The Paper Industry The Basis Weight Valve Is One Of The Most Important Valves In A Paper Machine. A Valve With Proper Valve Characteristic, And An Actuator With A High Resolution, Is Required To Produce Paper With The Right Grammage (Mass Per Unit Area) Within A Narrow Tolerance Range.Basis Weight Valves In Paper Machines The Paper Grammage Is Continuously Measured During Operation Of The Paper Machine. This Is Done With Aball Segment Valve Equipped With An Electrical Actuator. The Actuator Has A High Resolution And In Our Case, We Can Provide A Valve That Gives A Resolution Of 1:8000. The Stock Flowing Through The Valve And Its Consistency Is Accurately Controlled And With Dilution In The Short Circulation And Control Of The Wire Speed, The Desired Basis Weight Of The Paper Is Obtained.
Motorized Basis Weight Control Valve System / Gsm Control Valve Systemcair Manufacturers A Synchronized And Tailor Made Combination Of Electrical Rotary/Vertical Actuator And V-Notch Ball Valve That Gives Perfect Controlling In Gsm Variation And Increase Production.

Features:

• V-Notch Ball Valve Offers Equal % Characteristics For Precise Control.
• Combination Of Electro-Mechanical Actuator & V-Notch Ball Valve.
• Flangeless Or Flanged (Optional) Body.
• Actuator With Almost Negligible Backless .
• Digital Valve Position Indicator.
• Easy To Install And User Friendly.
• Suitable To 5 Tpd To 300 Tpd.
• Customize Design To Satisfy Individual Needs.
• Can Be Hooked To Dcs/Qcs System.
• Maintenance Free.

Technical Specification:

• V-Port Segment Valve Construction: Flangeless Or Flanged V-Port Segment Valve.
• Nominal Dimensions: Dn 50-500 / 2” To 20”/ Pn25/40 (Ansi 150/300)
• Flow: 100% Full Open & Close
• Bodies: Ss-316
• Temperature Range: -40..+2600C
• Operation Range: 90 Degree
• With Full Steps: 10,000 / 900
• With Full Steps: 20,000 / 900Step
• Motor Rotary Actuator Valve Size: Dn 50–500 / 2”To 20”
• Output Torque: 200Nm
• Gear Ratio: 1:141
• Speed Of Operation: 7 To 3000 Sec.
• Adjustable (900 Rotation)Feedback Potentiometer: 2K Ohms
• Number Of Steps / Round: 20,000
• Working Pressure Range: Upto 40 Bar
• Motor Type: Non Blocking Stall
• Duty Holding Torque: 5.4 Nm
• Input Signal: 4020Ma / 5-24 V Pulses (Optional)Class Of Insulation: B Control Unit
• Option 115Vac/50 Hz
• Nominal Power: 200 W Max. Motor Power
• Output Power: Max 9A, 70V Dc To Motor In 6,3A
• Protection Class: Ip-65
• Max. Ambient Temperature: 500C
• Control Signals: 25W
• Pulse Duration: Min. Input Freq. 0Hz / Max. Input Freq. 400Hz (1/4, ½, 1/1-Step) 200 Hz (2/1-Step)
• Time Duration: Default Speed 150Hz/ Min. Speed 50Hz/Max. Speed 2Khz
• Electronics Locations: Max. Distance Between Motor And Electronics Is 120M. / 360Ft.
• Manual Push Button: Manual Auto Push Buttons /Open & Close Push Buttons / Lcd
• Display Cable: With 120 Mtrs.
• Voltage Control: Through Ups