Industrial Valves

Product Details:

We are offering a wide range of Cair Automatic Pressure Reducing Valve to our clients.

Product Details:

Inching Electric Actuator

We Offers 415V AC three Phase Rotary Electrical Actuator Operated Offset Disc Design Wafer Type High Performance Butterfly Valve.

Electrical Actuator Details:
Manufacturer: Cair Euromatic Automation Pvt. Ltd.
Brand: Cair
Model: ATQ IN VOT
Characteristic: Inching Type
Travel: 90 Degree

Potentiometer Feedback. : 4~20 mA
Indicator: Continuous Position
Indicator Phase: Single Phase
Power Supply: 415V AC, 50 Hz
Body Material: Aluminium Alloy
Ambient Temperature: -20°C ~ 80°C
Motor Insulation: Class F
Protection Class: IP 67 - Weather Proof
Limit Switch: 1NO + 1NC Output of 415V AC
Position On Power Fail: Stay Put
Manual Override: Provided

Accessories:    Modulating Controller: Input Signal 4 ~ 20mA    Potentiometer Feedback    Integral Starter Unit    Control Panel

Torque Range: 35 nm to 3500nm

Key Features:   
- Light Weight   
- Pressure Range   
- Multiple Operation   
- Easy Maintenance
 
Type:- Electric Actuator, Flame proof Electric Actuator, Electrically actuated valves, Electric Actuator operated valves, Explosion Proof Electric Actuator, Rotary Electrical Actuator, Multi Turn Electric Actuator, Linear Actuator, Damper Actuator, Motorized Butterfly Valve, Motorized Ball Valve, Motorized Gate Valve, Motorized Damper Valve, Motorized Globe Control Valve, Motorized steam Control Valve

Additional Information:

• Item Code: ATQ-IN-VOT

Product Details:

"Cair" offers Modulating Type 220V AC Single Phase Electrical Actuator Operated 2 Way Globe Type Control Valve Flanged End.

Electrical Actuators Details:Manufacturer: Cair Euromatic AutomationBrand: CairModel: VOND PROCharacteristic: Modulating TypeTravel: LinearIndicator: Continuous Position IndicatorPhase: Single PhaseInput Signal: 4 ~ 20 mAOutput Signal: 4 ~ 20 mAPower Supply: 220V ACBody Material: Aluminium Alloy Ambient Temperature: 20°C ~80°CMotor Insulation: Class FProtection Class: IP 65 Weather ProofPosition on Power Fail: Stay PutManual Override: Wheel Type

Accessories:
Interface UnitControl PanelInput Signal: 4 ~ 20 mAPosition Feedback: 4 ~ 20 mA
Size Range: 15 MM To 200 MMGlobe Type Control Valve Details:Characteristic: Proportionate Type (Equal % Type)Valve Type: 2 Way Globe Type Flow PatternBody: ASTM A216 Gr. WCBTrims: SS 410Trim Design: Cage Guided Pressure BalancedEnds: Flanged End to ANSI 16.5 RF (150#)Bonnet: StandardGland Packing: Teflon / GraphoilTemperature: 250°CLeakage Class: IVWorking Pressure: 8 Kg/Cm²

Application:Widely used in the fields such as Petroleum, Chemical Industry, Power Plant, Metallurgy, Pharmacy, Paper Industry, Energy, Water Treatment Vessel, Textile, Food Processing, Buiding Automation Etc...

Additional Information:

• Item Code: VOND-PRO

Product Details:

"Cair" offers Single Phase Quarter Turn Electric Actuator for Dampers, Valves and Engineering Use.
Features:15 Nm to 4000 Nm Torque of  Electric Actuators Made of Aluminum Alloy which can resist against heat, Acid, Alkali, Water Proof, dust proof.Low Power Consumption, High Efficiency and Excellent weatherproof heavy -duty motor.Stabilized start speed to effectively avoid water hammering to prolonge the service of life tubes.Advance design manual override without any clutch to prevent user from injury.All the joints on the housing are armed with waterproofing seal (IP 67), which is appropriate for use in outdoor environment.Continuous mechanism position indication.Low noise level.Built-in Thermal Protection which prevent motor burning out.
Various Options:
On - Off Type Electric Actuators Modulating / Regulating Type Electric Actuators With Integral Starter unit Electric Actuators Signal Input: 4 ~ 20 mA / 1 ~ 5V DC / 2 ~ 10V DC Electric Actuators Potentiometer Feedback Electric Actuators Additional Limit Switched Electric Actuators2 Wire System for On - Off Operation Electric Actuators
Standard Voltage:220V AC Electric Actuators110V AC Electric Actuators24V DC Electric Actuators380V AC Electric Actuators
Application:Widely used in the fields such as Petroleum, Chemical Industry, Power Plant, Pharmacy, Paper Industry, Water Treatment Vessel, Textile, Food Processing, Building Automation etc.

Product Details:

Belimo Type Actuator valve

"Cair" offers Single Phase Quarter Turn Electric Actuator for Dampers, Valves and Engineering Use.

Features:

• 15 Nm to 4000 Nm
• Made of Aluminum Alloy which can resist against heat, Acid, Alkali, Water Proof, dust proof.
• Low Power Consumption, High Efficiency and Excellent weatherproof heavy -duty motor.
• Stabilized start speed to effectively avoid water hammering to prolonge the service of life tubes.
• Advance design manual override without any clutch to prevent user from injury.
• All the joints on the housing are armed with waterproofing seal (IP 67), which is appropriate for use in outdoor environment.
• Continuous mechanism position indication.
• Low noise level.
• Built-in Thermal Protection which prevent motor burning out.

Various Options:

• On - Off Type
• Modulating / Regulating Type
• With Integral Starter unit
• Signal Input: 4 ~ 20 mA / 1 ~ 5V DC / 2 ~ 10V DC
• Potentiometer Feedback
• Additional Limit Switched
• 2 Wire System for On - Off Operation

Standard Voltage:

• 220V AC
• 110V AC
• 24V DC
• 380V AC

Application:

Widely used in the fields such as Petroleum, Chemical Industry, Power Plant, Pharmacy, Paper Industry, Water Treatment Vessel, Textile, Food Processing, Building Automation etc.

Additional Information:

• Item Code: MODUPVC
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad
• Production Capacity: 50no Month
• Delivery Time: 2 DAYS
• Packaging Details: WOODEN CASE

Product Details:

FIRE SAFE 2 PIECE DESIGN 2 WAY BALL VALVE FLANGED END 150#

Additional Information:

• Production Capacity: 200 IN MONTH
• Delivery Time: DEPEND ON QUANTITY
• Packaging Details: BOX PACKING

Product Details:

Electrical Actuator 415 V AC  - Three Phase Quarter Turn Rotary

 

Item Code: ATQ

"Cair" offers Three Phase 415 V AC Quarter Turn Rotary Electric Actuator for Dampers, Rotary Valves & Engineering Use.

 

Features:

30 Nm to 12000 Nm

Standard enclosure to water jet proof will water tight proof IP 67 Weathr Profe & Flame Prrofe (Explosion Proofe)

Squirrel cage motor is of encapsulated type, on high stall torque and low inherent force for seating & unseating of valves. All motors are integrated with build in thermal protection.

A pair of limit switches are activated by means of simple, reliable &adjustable cam plates, mounted directly and driven by center column. The unique cam plate design does not allow over travel of limit switches.

Electric Actuators on 100 Nm and above, are install with torque switches for over-load protection.

 

Various Options:

On - Off Type Electrical Actuators

On - Off Type with Integral Starter Unit Electrical Actuators

Modulating / Regulating type Electrical Actuators

Signal Input 4 ~ 20 mA Electrical Actuators

Potentiometer Feedback  Electrical Actuators

Additional Limit Switches Electrical Actuators

 

Standard Voltage:

415V AC Three Phase

380V AC Three Phase

230V AC Three Phase

Application:

Widely Used In The Fields Such As Petroleum, Chemical Industry, Power Plant, Metallurgy, Pharmacy, Paper Industry, Water Treatment System, Textile Industry, Food Processing, Building Automation etc…

Additional Information:

• Item Code: ATQ-IN
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: EX WORKS
• Production Capacity: 50 per month
• Delivery Time: Ready Stock Depend upon quantity
• Packaging Details: WOODEN PACKING

Product Details:

Multi Turn Electric Actuators 415 V AC

 

Item Code: ATM

 

"Cair" Offers  approved multi turn electrical actuator suitable for gate valve, knife edge gate valve, globe valve and sluice valve.

 

Features:

100 NM to 2400 NM

Basic version with integral starter with modulating controller remote sensor operated intelligent series.

All joints on the housing are armed with water proofing seal IP 67 which is appropriate for use in outdoor environment.

Thermo switches embedded in motor winding of actuator will disconnect motor on over heating and protect for burning.

It adopts gear group with small modules fitting which can indicate accurate position of actuators.

Long valve life via soft start up and gradual closing.

Torque switch will stop the motor automatically in case of over torque in the valve.

Easy mounting, transmitting with equilibrium and low failure rate.

 

Various options:

 General basic On - Off type

On - Off type with integral starter unit

Modulating / regulating type

Signal Input 4 ~ 20 mA

Potentiometer feedback

 

Standard Voltage:

415V AC Three Phase

 

Multi turn electric actuators Suitable for:-

Motorized Gate Valves

Motorized Knife EDGE Gate Valves

Motorized Globe Valves

Motorized Control Valves

Motorized Gate Dampers

Motorized Slide Gate Valves

Motorized Sluice Valves

Multi turn gate valves

 

Application:

Widely used in the fields such as Petroleum, Chemical Industry, Power Plant, Pharmacy, Paper Industry, Water Treatment Vessel, Textile, Food Processing Etc.

Additional Information:

• Item Code: ATM-IN

Product Details:

BODY / BONNET                                  : DI

WEDGE                                                   : DI+EPDM

STEM                                                      : AISI 410

DESIGN & MFG STANDARD               : BS 5163

TEMPERATURE                                      : UP TO 80 °C

PRESSUR RATING                                                : PN 16

END CONNECTION                              : FLANGED END TO IS 1538

Product Details:

BODY                                : POLYPROPYLENE               

BALL                                 : POLYPROPYLENE

SEAT                                 : PTFE    

O RING                             : EPDM

HANDLE                           : PVC                                      

WORKING PRESSURE     : UP TO 8 KG / CM²             

OPER TEMP                     : UP TO 80⁰C

END CONN.                     : SCRWED END / FLANGED END 150#

Product Details:

  We are, manufacturing Hand operated Valve based at Ahmedabad, Gujarat providing services to all over the world. Kindly con tact us for further inquiry

Additional Information:

• Production Capacity: 1000 PER MONTH
• Delivery Time: READY STOCK AVAILABLE
• Packaging Details: DEPEND ON ORDER QUANTITY

Product Details:

  We are, manufacturing High Pressure Ball Valve based at Ahmedabad, Gujarat providing services to all over the world. Kindly con tact us for further inquiry

Product Details:

  We are, manufacturing Handle Ball Valve based at Ahmedabad, Gujarat providing services to all over the world. Kindly con tact us for further inquiry

Product Details:

  We are, manufacturing Actuator operated & Manual PVC Butterfly Valve based at Ahmedabad, Gujarat providing services to all over the world. Kindly con tact us for further inquiry

Product Details:

  We are, manufacturing Tamper proof air Valve based at Ahmedabad, Gujarat providing services to all over the world. Kindly contact us for further inquiry

Product Details:

  We are, manufacturing Actuator operated & ManualCast Iron Non Return Valve based at Ahmedabad, Gujarat providing services to all over the world. Kindly con tact us for further inquiry

Product Details:

BODY                                     : UPVC

BALL                                       : UPVC

SEAT                                       : PTFE

TEMP                                     : UP TO 80°C

WORKING PRESURE           : UP TO 8 KG/CM²

END CONNECTION                              : SOCKET TYPE/SCREWED END

Product Details:

PORT                                                      : SPECIFY "L" & "T" PORT WITH ORDER

BODY                                                      : WCB/SS 304/SS 316

BALL                                                       : SS 304/SS 316

SEAL                                                       : PTFE

OPER. TEMPERATURE                         : UP TO 180 °C

WORKING PRESSUR                            : UP TO 10 KG / CM²

LEAKAGE CLASS                   : VI                                         

END CONNECTION                              : SCREWED TO BSP (F)/FLANGED END 150#

MEDIA                                    : AIR, WATER, OIL, GAS

Product Details:

BODY                                                      : CF8 / CF8M

BALL                                                       : CF8 / CF8M

SEAT                                                       : PTFE

PRESSURE                                             : UPTO 10KG/CM²

TEMPRATURE                                        : UPTO 180° C

LEKAGE CLASS                                      : VI

ENDS                                                      : FLANGE END (150#) / SCREWED END

Additional Information:

• Production Capacity: 2000 MONTH
• Delivery Time: DEPEND ON ORDER QUANTITY
• Packaging Details: BOX

Product Details:

VALVE DETAILS:

BODY                                       : SS 304

TRIM                                         : SS 304

PRESSUR RATING                   : PN 10

END CONNECTION                   : FLANGE ENDAS PER 150#

Additional Information:

• Production Capacity: 500 MONTH
• Delivery Time: DEPEND ON ORDER QUANTITY

Product Details:

  We are, manufacturing Air Solenoid Valve  based at Ahmedabad, Gujarat providing services to all over the world. Kindly con tact us for further inquiry

Product Details:

“CAIR” Gland less Piston valve –Uni Klinger type

“CAIR” Gland Less  Piston Valve is basically Seat less and Glandless valve and by virtue of its design can replace both, the conventional type of Gate and Globe valves, with distinct advantages over them.

The Klinger Piston valve works on the principle of Resilient rings in conjunction with a Metallic Stainless Steel Piston, that moves vertically between the rings, giving a Seal that is both effective as well as Durable.
This sealing system gives a bubble tight shut off, equivalent if not superior to Class VI leak standards.

The Sealing rings are the heart of the valves, are available in Non Asbestos, Tanged Graphite, and Graphited Asbestos varieties, to effectively handle more than 250 Industrial Media.

“CAIR” Gland Less piston valves are ideally recommended for critical and hazardous media, including Steam, Heat Transfer Oils, Acids, Gases, VACUUM.

Manufactured in Forged Carbon Steel / Stainless Steels to 800# – Sizes 15mm to 40mm, in SW and Threaded Ends.

Cast Carbon Steel / Stainless Steels with Flanges to 150#, #300 & DIN standards 50 to 200mm.

Salient Features:
• Economic, easy to service
• Absolutely leak-tight across the ports and to the atmosphere
• No erosion of sealing surface
• Saves energy and does not contaminate the environment
• Maintenance free

“CAIR” Gland less Piston valves can be provided with additional feature like:
• Regulating Piston/Lantern Bush; for coarse regulating/Throttling operation
• Extended Spindle: For Cryogenic application/Hot media to prevent heat transfer to H/W and aid handling of valve
• Heating Jacket: For Media that tends to solidify/crystallize at low temperature and needs constant heating by either steam/Thermic oils circulated through the Jacket.
• Pneumatic, Hydraulic or Electrical Actuator: For remote operating of the Valves

Type of Valve     : Gland Less Piston Valve
Body     : ASTM A 216 Gr. WCB
Bonnet     : ASTM A 216 Gr. WCB
Pressure     : 40 Kg/cm2  Max.
Temperature     : 400 OC Max.
Face to Face     : IEC ??? 2001
Leakage Class     : Class VI
Flanges     : DIN 2545 ( PN 40 ) ASME B 16.5 ??? 150# / 300#

Additional Information:

• Production Capacity: 500 per month
• Delivery Time: depend on order quantity
• Packaging Details: box packing