Cair Euromatic Automation Private Limited

Cair Euromatic Automation Private Limited are offering you our product Gear Box Valves to our client.

Y-type filter, as an indispensable equipment in transferring water, is normally installed in the inlet of the pressure reducing valves, decompression valves, float control valves and other equipment to remove the inclusion of medium, which can protect the normal use for valves and equipment, Filter has an advantage in structure, low-resistance and convenient sewage with small shape, Slim filtration holes, high-effect, convenient installation and repairing, low costs and short time pollution

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Production Capacity: 500 /1

Cair Euromatic Automation Private Limited are offering you our product Bevel Gear Box for Electrical Actuator to our client.

Cair Euromatic Automation Private Limited are offering you our product Manual Override Declutchable Gear to our client.

Strainers are important components of piping systems to protect equipment from potential damage due to dirt and other particles that may be carried by the process fluid.

During system start-up and flushing, Strainers may be placed upstream of pumps to protect them from construction debris that may have been left in the pipe. The figures here below depicts typical start-up Strainers. Permanent Strainers may be installed upstream of control valves, traps, and instrutments to protect them from corrosion products that may become dislodged and carried throughout the piping system.This product is designed for remove foreign matter from pipe lines and provides protection for pumps, meters, valves, and other similar mechanical equipment, which is called as Strainer. "Y" Type Strainers are named after their shape and normally used for course filtration. But with large filtration area can be used with fine mesh also. The Strainer improves the clearance in the medium, and prolongs the life of valves; protect expensive pumps, meters and other equipments. It is suitable for water, Air, Gas, petroleum, steam and other fluids.
A Y-strainer can be installed in either a horizontal or vertical position (Downward flow) with the screen elementpointing downward. This allows the strainer screen to collect material in the strainer at the lowest point of the screen.Some typical Strainer opening or mesh sizes are provided by the table below for various equipment. The mesh sizes (or openings) are the usual maximums for normal operation. These opening sizes vary with the application, but should not exceed the value recommended for the particular type of equipment.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: AHMEDABAD
• Delivery Time: DEPEND ON CONTITY
• Packaging Details: BOX PACKING