Cair Euromatic Automation Private Limited
Narolgam, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 01 Piece |
| Size | 50MM |
| Model | MGV-IN |
| Brand | CAIR |
| Power | 22 kW |
| Temperature of Media | High Temperature |
| Voltage | 415V AC |
Actuator Details:
Knife Edge Gate Valve:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | CAIR |
| Material | Stainless Steel |
| Valve Size | 2" TO 20" |
| Application | POWER PROJECT / SLAG WATER |
| End Connection | FLANGED END 150# |
| Media | Powder/Solids, SLAG WATER |
| Temperature Of Media | Low Temperature |
| Product Type | BSGV |
| Trim | WCB+BASALT |
GATE VALVE DETAILS:
BODY : WCB + BASALT
DISC : WCB + BASALT
BONNET : WCB + BASALT
STEM : STAINLESS STEEL(2CR13)
SEAT : PTFE
TEMPERATURE : 200 ºC
END CONNECTION : FLANGED END 150#
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Brand | Cair |
| Valve Size | 300mm |
| Media | Air, Gas |
| Temperature of Media | High Temperature |
| Condition | New |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 50mm |
| Model | Rsgv |
| Brand | CAIR |
| Color | BLUE |
| Material | DI |
Resilient Seated Gate Valve
“CAIR” RESILIENT SEATED GATE VALVE BS5163 | NON RISING STEM DOUBLE FLANGE CONNECTION(Brass nut type)
Design Features | Resilient Seated Gate Valve
• Design comply to EN1171 / EN1074 / BS5163
• Flanges are drilled to EN 1092-2 / BS4504
• Pressure Rate: PN10/16, (PN25 for DN40-200)
• Test: Body test 1.5 x PN, Seal test 1.1 x P
• Medium: Neutral water, Drinking water, Sewage
• Rolled thread ensure smooth thread edgesand low operating torques
• Bonnet bolts are in Galvanized carbon steelSS304 upon request
• 4 o-rihen valve fully opened.
• Thrust washer - Brass material, to get more reliable strength and long service life when comparing to other factory's nylon material.
• Body/bonnet connection Bonnet gasket fits into a recess in valve bonnet preventing it from being blown out by pressure surges.
• Wedge nut - made of copper alloy with lubricating ability providing optimum compatibility with the S.S. stem.
• Bolts sealed with hot met
• Lifting rings
• Operation: Handwheel Square cap Gearbox, Actuator
• Manufacturing standard meets BS EN 1074, B S 5163.
• Both inside & outside coated with epoxy resin powder.
Standard color similar to RAL5005 other colors upon request.
• With rubber dust cover
• O-ring bonnet gasket wraps each bolt to prevent corrosion.
• Completely free and full bore self clearning & low pressure loss.
• Clockwise closing (CWC) as standard.
• Sealing: Class A (zero leakage
• 100% testing before delivery
ITEM | PART NAME | MATERIAL |
1 | Body | GGG50 |
2 | Disc | EPDM+DI |
3 | Bonnet Gasket | NBR |
4 | Stem | SS420 |
5 | Bonnet | GGG50 |
6 | Thrust Washer | Brass |
7 | Thrust Sleeve | Brass |
8 | Gland | GGG50 |
9 | Hand wheeel | GGG50 |
10 | Bolts | SS304 |
11 | Washers | SS304 |
12 | Dust Cover | NBR |
13 | O-RingNBR | NBR |
14 | O-Ring | NBR |
15 | O-Ring | NBR |
16 | Stem Nut | Brass |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 15 mm to 500mm |
| Model | RSSGV |
| Brand | CAIR |
| Material | SGI / WCB / SS304 |
| Color | Blue |
Resilient Seated Sluice gate Valve
“CAIR” RESILIENT SEATED GATE VALVE BS5163 | NON RISING STEM DOUBLE FLANGE CONNECTION (Brass nut type)
Design Features | Resilient Seated Gate Valve
• Design comply to EN1171 / EN1074 / BS5163
• Flanges are drilled to EN 1092-2 / BS4504
• Pressure Rate: PN10/16, (PN25 for DN40-200)
• Test: Body test 1.5 x PN, Seal test 1.1 x P
• Medium: Neutral water, Drinking water, Sewage
• Rolled thread ensure smooth thread edgesand low operating torques
• Bonnet bolts are in Galvanized carbon steelSS304 upon request
• 4 o-rihen valve fully opened.
• Thrust washer - Brass material, to get more reliable strength and long service life when comparing to other factory's nylon material.
• Body/bonnet connection Bonnet gasket fits into a recess in valve bonnet preventing it from being blown out by pressure surges.
• Wedge nut - made of copper alloy with lubricating ability providing optimum compatibility with the S.S. stem.
• Bolts sealed with hot met
• Lifting rings
• Operation: Handwheel Square cap Gearbox, Actuator
• Manufacturing standard meets BS EN 1074, B S 5163.
• Both inside & outside coated with epoxy resin powder.
Standard color similar to RAL5005 other colors upon request.
• With rubber dust cover
• O-ring bonnet gasket wraps each bolt to prevent corrosion.
• Completely free and full bore self clearning & low pressure loss.
• Clockwise closing (CWC) as standard.
• Sealing: Class A (zero leakage
• 100% testing before delivery
ITEM | PART NAME | MATERIAL |
1 | Body | GGG50 |
2 | Disc | EPDM+DI |
3 | Bonnet Gasket | NBR |
4 | Stem | SS420 |
5 | Bonnet | GGG50 |
6 | Thrust Washer | Brass |
7 | Thrust Sleeve | Brass |
8 | Gland | GGG50 |
9 | Hand wheeel | GGG50 |
10 | Bolts | SS304 |
11 | Washers | SS304 |
12 | Dust Cover | NBR |
13 | O-RingNBR | NBR |
14 | O-Ring | NBR |
15 | O-Ring | NBR |
16 | Stem Nut | Brass |
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Brand | Cair |
| Model | Atmgv |
| Size | Customized |
| Material | SS |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Ambient Temprature | 20 to 80 c |
| Material | CI |
| Power | 26 kW |